H.E.P.A. Filter

A HEPA Filter is supplied with each system.  The HEPA Filter removes the very small particles, such as smoke (tobacco, burning wood, oil, rosin), dust mites, spores, mold spores, pollen, spray paint, spray paint dust, ashes, cement dust, auto emissions, textile fibers, fiberglass, hairspray, insecticide dust, copier toner and most viruses, just to name a few!  As you can see, the HEPA Filter is an extremely important filter and when used and maintained properly will dramatically improve your indoor air quality.  We cannot stress enough the importance of the HEPA Filter to our system and the fact the HEPA Filter must be maintained in order to achieve the maximum results.

Here is a brief explanation of a HEPA Filter and how it works.  The HEPA Filter is a throwaway filter in a rigid metal frame.  It is constructed with High Efficiency water resistant, inorganic glass micro fiber media that is pleated to form a media pack. Rolled edge aluminum separators are inserted between each pleat to provide an extensive open area for airflow and to stabilize the media pack.  The entire media pack is sealed with a fire retarding, rubber base, two-part sealant that bonds the media and separators to the interior of the metal filter frame to prevent air bypass. As air passes into the HEPA Filter, the particles (such as smoke, dust, etc...) attach to the filter media and are trapped.  As the HEPA Filter collects more and more particles, the HEPA Filter actually increases in efficiency, but with this efficiency also comes a reduction in air velocity.  As the HEPA Filter continues to load, less air will be able to pass through the filter, therefore greatly altering the effectiveness of the system.  Over time you will see the effectiveness of the system lessen and it will be an indicator that it may be time to replace the HEPA Filter.  Proper maintenance of the HEPA Filter is absolutely essential to the functionality of our air filtration systems as well as a vital part in continuing to provide a clean, healthy, pleasant indoor air environment.

Carbon Filter

Activated Carbon Filters (pad) are supplied with each system.  The Activated Carbon Filter is changed every two months and removes odors by absorbing the odor molecules into the filter. Since the Activated Carbon can only absorb a certain amount of molecules, it will begin releasing the trapped molecules, once it is full, back into the air if not properly maintained.  Most indoor air quality issues are resolved by using the standard activated carbon filter pad.  

For those who have heavier odor situations; we offer Activated Carbon Filters (panel) in lieu of the standard Activated Carbon Filters (pad).  The Activated Carbon panel filter is changed every four months and is filled with Activated Carbon pellets.  These pellets, which have more absorption strength, have a longer life and therefore can be more effective for odor control.  As with the standard Activated Carbon, the Activated Carbon panel filter must be maintained in order to preserve proper function of the system and promote healthy indoor air.


Polyester Pre-Filters are supplied with each system.  The Pre-Filter is changed monthly and removes larger particles such as lint, hair, dust and pollen.  The Pre-Filter is important because not only does it remove the larger particles, it also helps prolong the life of the HEPA Filter in the system.  Essentially, the Pre-Filter is the first line of defense in maintaining your system; therefore promoting better indoor air quality.



Standard Kit


Units 10.0, 20.0, 22 FM, Mark 10, Mark 15, and Mark 20 can be fitted with a Carbon-V Bank Filter Kit.  

The Kit includes 12- Polyester Pre-Filters, 1- Carbon V-Bank, and 1-6" Deep HEPA Filter.

​Utilizing the activated carbon in a 6" Carbon V-Bank filter, changed every 12-18 months, offers the maximum in odor control.