airpurificationservices.com
10.0 Flush Mount
10.0 Flush Mount UnitUnit is designed for ceilings 12' & Under:
The 10.0 FM
Air Cleaner is designed to drop into a suspended ceiling.
It replaces either 1- 2x4 tile or 2- 2x2 tiles from the suspended ceiling.
In order to install the 10.0 Flush Mount easily, the clearance above the suspended ceiling needs to be at least 13", and it is recommended it be
installed in areas not exceeding a 13' ceiling height.
The weight of the system does not rest on the ceiling grids, but is secured above the suspended ceiling to a permanent structure, such as a joist or beam.
All filters on the 10.0 Flush Mount are accessible from the louvered door
and hinge door on the face of the system.
It replaces either 1- 2x4 tile or 2- 2x2 tiles from the suspended ceiling.
In order to install the 10.0 Flush Mount easily, the clearance above the suspended ceiling needs to be at least 13", and it is recommended it be
installed in areas not exceeding a 13' ceiling height.
The weight of the system does not rest on the ceiling grids, but is secured above the suspended ceiling to a permanent structure, such as a joist or beam.
All filters on the 10.0 Flush Mount are accessible from the louvered door
and hinge door on the face of the system.
| Dimensions: | 46 1/2" L x 23 3/4" W x 12" H |
| Electrical: | 4.2 amps, 120 volts, 2-speed, 10' power cord, 3 prong grounded plug |
| Filters: | 1/2" Polyester Pre-Filter, 1/2" Activated Carbon Filter, 12" Deep HEPA Filter |
| Weight: | 85 lbs. |
| CFM: | 1200 |
| Cabinet Finish: | White; Black, optional ($50 Charge) |
| Installation: | Suspended Ceiling Application |
FILTERS INCLUDED - 1 YEAR SUPPLY
12
-- Pre-Filters
6 -- Activated Carbon Filters
1 -- 12" Deep HEPA Filter
1 -- 12" Deep HEPA Filter
